钻探抽沙船浮体双体结构单体长55米，宽2.1米，高1.25米：底板、侧板采用6毫米钢板，面板采用4毫米防滑板，浮体内部每间隔60毫米采用槽钢、角钢双层骨架焊接，防锈采用防锈油漆处理。挖斗配用145个，挖斗为方斗，挖斗容积为0.06立方米，挖斗底板采用10毫米钢板，围板采用6毫米钢板，斗唇采用15毫米锰钢。链条采用普钢制造，磨损部位采用45钢高频热处理（注：磨损部位可以更换），链条长760毫米，宽90毫米，高40毫米。

Drilling pumping sand floating body dimer structure monomer 55 meters long, 2.1 meters wide, 1.25 meters high, bottom plate, side plates with 6 mm steel plate, panel with 4 mm anti slide, floating body at intervals of 60 mm with channel steel, angle steel double deck frame welding, rust with rust proof paint processing. Digging bucket equipped with 145, the bucket to bucket, bucket capacity of 0.06 cubic meters, the bucket bottom plate with 10 mm steel plate, hoarding by 6 mm steel plate, with 15 mm steel bucket lip. The chain using Pu steel manufacturing, wear parts using 45 steel high frequency heat treatment (Note: wear parts can be replaced), the chain length of 760 mm, 90 mm wide, 40 mm high.